Date: Fri, 21 Nov 1997 03:56:08 -0800 From: Phil Hall To: editor@qrz.com Subject: Mod for Cherokee AH-100 The Cherokee AH-100 is a Handheld AM/SSB CB. It will cover 10 meters as well. The mod is: Remove the back cover from the radio. Locate the PC board that the PTT is mounted to. Locate the 3 solder lands that just end. Solder a bridge between all 3 solder pads. Reassemble the radio. Now when you turn it on, press the channel 9 button and hold for 2 seconds. (the display will remain blank until released) You will now have from 25.165 - 29.655 in 10 bands! Band E is the cb channels and the 'E' is not displayed. NOTE: if the unit has been powered before the MOD, you must reset the processor, Just place a jumper over the Battery contacts for 24 hours while the unit is on