Path: njitgw.njit.edu!rutgers!att!cbfsb!cbnewsb.cb.att.com!wa2ise
From: wa2ise@cbnewsb.cb.att.com (robert.f.casey)
Newsgroups: rec.radio.amateur.misc
Subject: Standard C5608DA 800MHz rx keyboard mod file
Keywords: mods
Message-ID: <1992Aug15.031807.8588@cbfsb.cb.att.com>
Date: 15 Aug 92 03:18:07 GMT
Sender: news@cbfsb.cb.att.com
Organization: AT&T
Lines: 16

copied from packet:
 Msg# TSF  Size #Rd  Date  Time From   MsgID        To
 3497 BF   1349   1 08-Aug 0826 WB1ERG 7404_WB1ERG  ALL@USBBS ()
 Sb: Standard 800 mhz mod

The message I left earlier on the Standard C5608DA Dual Bander Mod for 800 to
1000 mhz was incorrect, you do not need the Mod Kit from Standard to receive
on 800 to 1000 mhz.. If you put your rig in scan mode you will find that
it does receive .... Standard said it would not receive without the 800 kit.
I just found it does. 
.. In case any of you did not read the mod, all you do is Hold the FUNC key
and push the up key and you are on 800 or 900 mhz , to reverse this just FUNC
key and the Down Key, Wa La... enjoy
Steve WB1ERG
==============================================================================
Note: I haven't tried or verified this, proceed at your own risk.  WA2ISE