Alnico DJ-195T 2m HT Modifications

Use this modification at your own risk.  It will probably void the
warranty.

This modification will open up the transmit frequencies from 138MHz  to
174MHz including the VHF public service and marine bands.  The
modification is very easy.  Remove the battery pack and you will see a
black cover in the lower right corner on the back of the rig.
Carefully remove this plastic cover with a small tool.  Inside you will
see a blue wire. Cut or remove this blue jumper wire and do a full
microprocessor reset as described in the instruction manual.  You will
lose all previously stored frequencies, labels, and other setup data
and will have to re-enter this information.  The rig now has extended
transmit capability.

Original information provided by:  Kent LeBarts K6IN [mailto:
k6in@elite.net]
Submitted by: Geoff Mendenhall W9NEZ [mailto: gmendenh@one.net]