DR119T

From:  WB3FKP @KB3QW.#EPA.PA.USA.NA           
MARK IN ALDEN,PA

Subject: EXTENDED FREQUENCY MOD FOR ALINCO DR119T 2 METER TRANSCEIVER

**Remove the two screws from on the top cover and loosen the four side screws
  (don't have to remove) and remove cover

**Cut the single wire (blue) standing up from behind the tuning knob
  (large knob on left front of rig)

**Cover the ends of the wire with tape or heat shrink tubing

**Replace cover

     When done do a master reset of the rig as per manual- hold
F and VFO/M buttons while turning the radio ON.
     To change bands press function (F) followed by MHZ button

     After the mod I now had:

     130 MHZ - 173 MHZ        Receive and transmit    (130-169.995MHZ )
     335 MHZ - 409 MHZ        Receive                 (340-380MHZ band)
     810 MHZ - 989.995  MHZ   Receive                 (870-890MHZ band)

Good luck and happy listening!    73   Mark
****************************************************************************
THANKS AND HOPE TO HEAR FROM YOU. 73 MARK

WB3FKP @KB3QW.#EPA.PA.USA.NA